This insert for the Milwaukee low profile organizer allows you to store up to eleven ¼" shaft router bits in a single cup. Here is the offset version for longer bits: https://makerworld.com/en/models/43427
Be sure to print “test_print.stl” in default orientation to find the best hole diameter for your printer, filament and router bits. You want the holes to be small enough that bits don't fall out, but large enough that you don't bloody your finger tips removing the bits. For me, I oversize the holes by 0.20 mm for PETG and 0.30 mm for PLA. 0.20 mm oversize would be the model with p20 in the name, 0.30 mm oversize has p30 in the name, etc.
Don't hesitate to request model tweaks👍, and thanks to “like” 💟, download, and share your “make”⭐.
small bin | https://makerworld.com/en/models/36753 | |
small bin | https://makerworld.com/en/models/36755 | |
small bin/labels | https://makerworld.com/en/models/142169 | |
small bin/labels | https://makerworld.com/en/models/140642 | |
small bin/labels | https://makerworld.com/en/models/139006 | |
large bin | https://makerworld.com/en/models/36748 | |
large bin | https://makerworld.com/en/models/36757 | |
large bin/labels | https://makerworld.com/en/models/142157 | |
large bin/labels | https://makerworld.com/en/models/142162 | |
¼" router bits | https://makerworld.com/en/models/43423 | |
long ¼" router bits | https://makerworld.com/en/models/43427 |