LED Matrix Frame Stand
Copyright Claim
LED Matrix Frame Stand
Boost
12
14
8
Print Profile(1)
LED Matrix Frame Stand (0.28mm layer, 2 walls, 15% infill)
Designer
29 min
2 plates
Boost
12
14
8
0
61
63
Released
Description
LED Matrix Frame Stand
Feet to support the LED matrix frames on a desk or shelf.
- Print the stands on their side
- Optional anti-skid pads (print in High Friction TPU)
Works with
- 16x16 LED Matrix Frame https://makerworld.com/models/122272
- 8x32 LED Matrix Frame https://makerworld.com/models/127255
- 16x32 LED Matrix Frame https://makerworld.com/models/135943
- 32x32 LED Matrix Frame https://makerworld.com/models/178256
My other LED projects:
Comment & Rating (8)
All
Print Profile
LED Matrix Frame Stand (0.28mm layer, 2 walls, 15% infill)
Perfect !
0
Reply
Print Profile
LED Matrix Frame Stand (0.28mm layer, 2 walls, 15% infill)
could be a bit more snappy because it tends to fall of while lifting it.
The designer has replied
0
Reply
I uploaded a new version of the stands with a little less clearance, should be tighter now. If they're still too loose for you, try adding .5mm or less in the "X-Y countour compensation" setting (in BambuStudio/OrcaSlicer, under Quality/Precision)
0
Reply
Print Profile
LED Matrix Frame Stand (0.28mm layer, 2 walls, 15% infill)
printed easy, holds really well
0
Reply
Print Profile
LED Matrix Frame Stand (0.28mm layer, 2 walls, 15% infill)
0
Reply
Print Profile
LED Matrix Frame Stand (0.28mm layer, 2 walls, 15% infill)
0
Reply
Print Profile
LED Matrix Frame Stand (0.28mm layer, 2 walls, 15% infill)
0
Reply
Print Profile
LED Matrix Frame Stand (0.28mm layer, 2 walls, 15% infill)
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld