This is a ceiling mount for an Asus RT-AX89X router. I needed some kind of ceiling mount to keep all the router cords away from the cats. I also wanted to access all of the ports.

The main body is a template of where to put the 4 parts that will have a zip tie to them. It can be printed flat and rotated on the P1P or similar-sized printer. It will serve as a template. You can mark the wall or ceiling where you want to mount it.

Drill it and attach any sort of anchoring you'll need. Attach the main body first and secure it in the middle with 2 screws.

Then attach each of the 4 zip tie ends to the ends of the main body. Put the screws through that.

Put a zip tie loosely in place on one of the ends.

Put one of the router's antenna through it. Then attach the other zip ties to the other antenna. This will keep the router in place with the antenna extended.

Now put the remaining 3 zip ties and slowly zip up each end until the router is flat on the ceiling.

Extend all of the antenna and then plug your router.

I think this can be mounted to a wall as well.