AMS HUB Guide for PTFE tubes by Nerro3D

Nerro3D

3D Printer>3D Printer Accessories

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 3 walls, 20% infill

Designer

39 min

1 plate

5.0(1)

Boost

Released

Description

AMS HUB Guide for PTFE tubes.

Support to guide the 4 tubes that go from the AMS to the HUB.
By placing this guide you will ensure that the 4 PTFE tubes enter at the proper angle inside the HUB, thus minimizing the problems that some AMS units cause when inserting or retracting the filament.

The guide holes have been designed taking into account the entry angle of each of the HUB holes.

You can place it with one of the screws that come stock with the printer.

The profile is made with 3 walls and 20% gyroid filling to make the piece more robust.

Comment & Rating (3)

@Garrett.marshal

tubes guide through nicely however the mounting screw hole is just slightly too small for the factory screw to go into and secure piece to the machine.

The designer has replied

@Nerro3D

Thank you very much for your comment. I designed it so that it fit quite tight, I imagine that a slight variation in tolerances in other printers can cause what you mention. Now I'm on vacation for a few days and I don't have access to my computer. When I return I will make it a little wider so that you don't run into that problem.

@pricjame

Print Profile

0.2mm layer, 3 walls, 20% infill

No more

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.