A1 Poop Bucket, fiber waste bowl
Adjustable sidewall in the Z axis (on the Y axis pad)
Larger box for multi-color print waste.
base: width 152mm, height 51mm
the height of the side with the Bambu logo is 230 in total
the height of the side without the logo is adjustable - in the Y axis, just download as needed in Bambu studio (green cube)
You can set or cancel the multi-color side printing in Bambu Studio
On the side there are two holes for sticking a magnet 8x2 mm or 10x2 mm (you don't have to use it). But I achieved an even better result by sticking two magnetic strips
for example:
https://www.aliexpress.com/item/1005001370451620.html?
I fixed the side panel to the base with instant glue
There is a Bambu Lab logo on the front wall. This logo can be printed in color - settings in Bambu Studio. In my experience, the result is weaker, it takes a long time to print and it is
a lot of waste - that's why I don't recommend it. A better option is to color the logo with acrylic paints. I also created a print, but it's letters and subsequent gluing - but it doesn't fit very well and needs to be adjusted - cut the letters.
Thanks for the like and any suggestions..
Let the printing work
Thread color according to your mood
I printed from PETG, but PLA will work just as well
Layer Height 0.16, Wall x3, Fill Density 15%
without supports
In the print profile, I have a lower print speed due to the possible knocking of the thin side wall.