I created a hueforged horror-clown. Picture shotted by myself, AI finished to a horror-clown and then hueforged.
If you are missing a shelf to put the picture or the other Hueforge pictures on the wall, take a look at my HueShelf ;)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Black Transmission Distance: 0.3
PLA Gray Transmission Distance: 2.5
PLA Orange Transmission Distance: 3
PLA White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Gray
At layer #12 (1.04mm) swap to Orange
At layer #18 (1.52mm) swap to White for the rest.
Have fun and share your makes with me ;)