Rugged Box/Case (NO SCREWS) for SD and micro SD cards by Markus710

Markus710

Tools>Organizers

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 3 walls, 15% infill

Designer

1.8 h

2 plates

4.7(56)

0.2mm layer, 2 walls, 15% infill

1.7 h

1 plate

4.5(30)

0.2mm layer, 2 walls, 15% infill

1.8 h

2 plates

4.8(8)

0.2mm layer, 2 walls, 15% infill ABS

1.7 h

1 plate

4.0(1)

Boost

197

329

109

862

744

Released

Description

Just use a piece of filament to attach the hinge and latch. The filament needs to be about 2 mm longer on every side. Then use a lighter and make it warm and push it flat.

Comment & Rating (109)

@user_1497307519

Print Profile

0.2mm layer, 2 walls, 15% infill

holes for the filament are too tight

(Edited)

@vlc999

nice design and works well

@GtM1993

Nice design, works perfectly! Printer - Bambu Lab P1S Filament - Esun PLA+ black and orange

(Edited)

@igy6outlaw

printed out in under 2 hours. used a 5/64 bit for the filament holes. and heated up a small flat head screwdriver for the ends of the filament. thank you great work. I do have a Timelapse of it as well.

@dannijens

Print Profile

0.2mm layer, 3 walls, 15% infill

cool little box that works like intended

@theinkspiration

Print Profile

0.2mm layer, 3 walls, 15% infill

I got a little silly with my colors, but I absolutely love this thing

(Edited)

@Dangalf

Print Profile

0.2mm layer, 3 walls, 15% infill

Cute and very functional. I used a soldering iron to put a head on the hinges; probably not required due to the tight fit, but looked more professional

(Edited)