Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 4
Swap Instructions:
Start with Charcoal Black
At layer #10 (0.88mm) swap to Scarlet Red
At layer #12 (1.04mm) swap to Lemon Yellow
At layer #18 (1.52mm) swap to Jade White for the rest.