Manger Christmas Ornament
Manger Christmas Ornament
Boost
125
200
51
Print Profile(2)
0.2mm layer, 3 walls, 15% infill
Designer
1.1 h
1 plate
PLA 0.20mm
39 min
1 plate
Boost
125
200
51
0
376
518
Released
Description
Manger Christmas Ornament
Feel free to use this as you see fit. Please don't sell the stl or 3mf files as I would like to keep them open and free. If you would like to sell the actual model, that's fine too, but I would ask that you consider buying me a coffee or something. My cashapp is $dejjen.
Comment & Rating (51)
All
Print Profile
0.2mm layer, 3 walls, 15% infill
turned out pretty nice, I had some stringing and a couple of dots fell off in my hand but I can't tell where they came from.
The designer has replied
0
Reply
The dots may have come from the very top of the ornament. There's 3 dots. If you still have trouble, try using Arachne wall generator, or play with toggling on/off thin wall detection. Last resort, ironing, or using a 0.2 nozzle.
(Edited)1
Reply
On second thought, After looking at your photo more closely, I can't tell where it would have come from. Everything looks right there...
(Edited)1
Reply
Print Profile
PLA 0.20mm
I was not very successful with PLA Silk, it was also very sticked to the bed. Some ornaments were not connected so felled off.
The designer has replied
0
Reply
model was sliced for normal pla not silk pla :P thanks tho
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
I used glow in the dark filament ..
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
lovely bauble..... printed on P1p with Bambu tough pla
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Came out great, thanks!
(Edited)
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Used PLA Tough and 0.2mm head, printed very nicely. Material was probably not the right one as a couple swirl centers broke off when scrapping off the plate. Doesn't seem to make any difference in appearance though.
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Ist echt schön dieser Anhänger, und er ist schnell gedruckt. Nur beim Lösen von der Druckplatte sollte man vorsichtig sein
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
El diseño es muy bonito, pero al imprimirlo se romen algunas partes pequeñas, en la foto que muestro es mi cama con los trozos pegado de 4 impresiones, los trozos son siempre la misma parte del diseño.
(Edited)
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
little details came off but beautiful design
(Edited)
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Fantastic print! Absolutely beautiful design, too!
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Share Alike
© 2024 MakerWorld