Intro

Introducing our peeping Pikachu Bookmark – a sweet companion for your reading! This cutie is both charming and functional, making it a delightful gift.
Crafted with care, it adds a touch of joy to your books.

It was printed on a Bambulab P1P with an AMS allowing for automatic filament changes, but you can achieve the same result by using the " pause at layer height setting in your slice " and changing the filament manually.
Filament is Polyterra from Polymaker.

Provided are an STL and a convenient m3f file ready to be printed with the automatic color changes.

You are not allowed to sell 3D prints of this design without being an active member on my patreon.

I would love to see prints of my designs, so don't hesitate to share pictures :)

Printing settings

Please make sure to check the setting “Detect thin walls” from the strength tab in your slicer.

This 3D print uses 3 different filament swaps :
For a layer height of 0.12mm :
- Start with a yellow filament.
- Switch to black (layer 13).
- Finish with red (layer 17).

Length of the 3D print is around 8.5 cm.