Overview

Baby Yoda made from kit card. After you fold it you can use it as small container.

Instruction

Do not use old brittle filament as the tabs may break off.

Check if your printer has good calibration of elefant foot. If elefant foot is to big then the holes for the hooks will be too small.

To achive color like at photo use layer 0.2 mm and change color at each layer. You bed level should be good calibrated.

Start with Black and next change it to

0,4 mm - White

0,6 mm - Green

0.8 mm - Brown

Prototyping

6 iterations to make Yoda :)

Have fun