TableTøp Stand is a 3D (support-less) printable modular boardgame (or any other stuff) holder to put above the table.

Notice and Discaimer

This model is heavily inspired by StageTop, a Kickstarter project that you can see here: https://www.kickstarter.com/projects/gutshotgames/stagetop-the-3d-printed-gaming-table/description

However, this is my own creation with several differences, intended to be an open-source alternative to StageTop.

Some of the main differences are related to the type of attachment between different components and the minimal number of elements in my design.

How Can I use?

You can use it as a shelf to raise the computer monitor or you can print more elements and use it for board- , role- or miniature gaming, in order to have more table surface available for your components, and be able to move them out of the way more easily.

This project is to be considered a beta version designed and prototyped in a short time.
All constructive feedback and suggestions are welcome!

Updates

• 2023-05-18 - add some new and improved version
  • cross tile and basic tile now have a screw
  • better screwhole
• 2023-05-18 - new side support v4
  • it is an improvement that makes it more beautiful and more robust)
• 2023-05-20 - frame v2b
  • revision b - fix holes width for better fit
• 2023-05-23 - new side support height
  • add 90mm height side support for who want more space under stand
• 2023-05-25 -
  • add 4x1 Gringridfinity edge holder
    

How to assemble

It's super easy to assemble
Print what you need according to the size you want to make

Here an example for 2x1 Table Top Stand

1. Prepare the frame, one support v4 and some screwhole v3
   
   
   
2. Put the support on the frame end use the screwhole
   
   
   
   
   
3. Repeat for all the edge
   
   
   
   
   
   
   
   
4. Add frame edge
   
   
   
5. Put the tile abobe the frame
   
   

This one is the screwhole version 2.



Difference from 50mm and 90mm support

Playable 3x2 frame

What you need

Printing

• Material: PLA
• Layer: 0.2mm
• Infill: 15%
• Supports: NO

Are other versions available?

If you like the model, but you have any suggestions for improvement, like and comment.
I will do my best to make this project better and better