Antinous

This bust of Antinous, categorized as item inv. no. 417, was excavated in Patras in 1856. The bust show typical features of Antinous's iconography, such as full lips, luscious curls, a broad chest, a straight nose, thick eyebrows and a melancholic expressionIt placed around 130–138 AC ,not long after Antinous's death in 130 AC.

The model can be used for study or for decoration in your home.

I am a sculptor and these are objects that we studied at university, so I scanned them with photogrammetry and printed them on my ender 3 s1.

There are 4 different stands that can fit to all busts.

The object size is 100mm (stand and bust) or you can resize it and the printing time with the settings i use is about 3-4 hours.

Τry to print the bust lying down to avoid marks on the face from the supports. In the slicer go to the rotate option and then to the Select face to align to the buiild plate option. Select the back side of the neck at the finish as seen in the photo.
.
.
.
FDM Settings

For the stand
Quality: 0,12
Infill: 10%
Speed: Print with less speed about 5-10 for better quality
Support: Off

For the bust
Quality: 0,12
Infill: 10%
Speed: Print with less speed about 5-10 for better quality
Support: On (Tree)
Build Plate Adhesion: Brim (for better adhesion)