Summary

A modern themed 6x4 picture frame.

All letters and hearts are separate parts that snap on to the frame allowing you to make each part a different colour.

Source files also included.

update:09/5/15

A user has pointed out that I have forgotten to add a printer tolerance to the frame to allow the letters to fit. This means that depending on how accurate your printer is you may not be able to fit the letters in so some sanding my be required to make the letters fit.

Alternatively follow Jetgsr's comment solution until I have time to fix it.

Instructions

Frame was printed in ABS at 0.2mm layer height with 20% infill, 2 shells, 3 bottom solid layers and 5 solid top layers.

Letters and hearts were printed in PLA at 0.2mm layer height with 10% infill, 2 shells, 3 solid bottom layers and 5 solid top layers.