DON'T USE THE PRINT PROFILE.
You will most likely need to print this with a brim and since you'll need to size it I didn't upload a print profile. But someone else did (within minutes of me publishing) and it doesn't have a brim. It will most likely fail to print. And even if it doesn't, chances are it won't be the right size. Bambu, in their wisdom, doesn't let me police print profiles on my listing so I can't delete it.
---
Just a simple bracelet I made for my wife. Nothing special. I printed it with a sparkly purple PLA as that's her favorite color and it gave it some pop. That's the one in the picture but note that I doubled the height in the slicer before I printed it to create a wider, flatter band.
Inner diameter is a hair under 31mm. Height is 10.6mm.
Can be scaled up/down in the slicer to create a larger or wider band. You will most likely need to do so since it's a slip-on bracelet and must be the right size for the intended participants wrist.