Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyTerra Black Transmission Distance: 0.3
PLA Protopasta Soda Green Transmission Distance: 16
PLA Real Filament Fluorescent Green Transmission Distance: 5
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Soda Green
At layer #13 (1.12mm) swap to Fluorescent Green
At layer #15 (1.28mm) swap to Savannah Yellow for the rest.