Cocktail Monkey (Hueforge)
Print Profile(1)
Description
Meet Chester the Cocktail Lounge Monkey… a very distinguished AI Generated gentleman, out and about town !
Had Fun with this one while learning the Hueforge Ropes !! I even shared a glass of brown liquor with Chester on the journey.
Hueforge describe for my iteration as follows:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Overture Black Transmission Distance: 0.5
PLA Inland Tough Brown Transmission Distance: 1
PLA BambuLab Matte Dark Brown Transmission Distance: 2
PLA PolyTerra Army Beige Transmission Distance: 0.5
PLA BambuLab Matte Latte Brown Transmission Distance: 2
PLA PolyTerra Pastel Peanut Transmission Distance: 0.5
PLA PolyTerra Pastel Peach Transmission Distance: 3.5
PLA Overture White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Brown
At layer #10 (0.88mm) swap to Dark Brown
At layer #14 (1.2mm) swap to Army Beige
At layer #16 (1.36mm) swap to Latte Brown
At layer #19 (1.6mm) swap to Pastel Peanut
At layer #22 (1.84mm) swap to Pastel Peach
At layer #25 (2.08mm) swap to White for the rest.
Documentation (1)
Comment & Rating (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
