Echo and Echo Dot 4-5 Stands by Tauron

Tauron

Household>Decor

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

Designer

4.1 h

3 plates

4.3(12)

Boost

129

Released

Description

Stands for Echo 4 and Echo dot 4. They should work with Echo 5th gen as I think they're the same size.

Included are two models; one for Echo dot 4 (smaller one) and one for Echo 4 (big one)

To get different color within the legs of Echo dot 4 cut a piece of filament and insert it in the leg.

For echo 4 (big one) I'm adding inserts you can print to put inside the legs.

Comment & Rating (15)

@freddyflv

Printed very well. waiting on the Echo 5th. Gen. Thanks for the model.

(Edited)

The designer has replied

@Tauron

Oh it looks awesome in marble, I'll have to make my own the same. Thank you for sharing a picture :)

@cammi187

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed the small version on my a1 for my echo 5 with clock. scaled the inserts at 78% scale to fit in.

@Bretthtml

Print Profile

0.2mm layer, 2 walls, 15% infill

good idea but unfortunately the inserts don't fit into either one of the models that you uploaded there are no inserts for the smaller one and for the bigger model they just don't fit in. it

The designer has replied

@Tauron

Smaller one doesn't use inserts you just insert a piece of filament and as for the larger one I'll have a look; I printed 3 of them for myself and they worked for me so I didn't really need to change anything; maybe different filament fits differently. Maybe I'll just get rid of the inserts on the large one and use filament just as the smaller one.

(Edited)