This is a 5 coaster set of ugly sweaters related to popular Christmas movies along with a coaster holder. These are designed with Hueforge and need the following color swaps per coaster… Each coaster takes 3-5 hours to print using the supplied 3mf profile.

=================
OH FUDGE COASTER
=================

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyTerra Lava Red Transmission Distance: 1
PLA PolyLite Pro Cold White Transmission Distance: 0.5
PLA Creatlity Hyper White Transmission Distance: 13

Swap Instructions:
Start with Lava Red
At layer #25 (2.08mm) swap to Cold White
At layer #34 (2.8mm) swap to Hyper White for the rest.

=================
RV COASTER
=================

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.08mm

Filaments Used:
PLA Sunlu Green Transmission Distance: 5
PLA PolyLite Pro Cold White Transmission Distance: 0.5
PLA PolyTerra Lava Red Transmission Distance: 1

Swap Instructions:
Start with Green
At layer #49 (2mm) swap to Cold White
At layer #66 (2.68mm) swap to Lava Red for the rest.

=================
GRINCH COASTER
=================

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Creatlity Hyper White Transmission Distance: 13
PLA PolyLite Pro Cold White Transmission Distance: 0.5
PLA Sunlu Green Transmission Distance: 5
PLA PolyLite Pro Black Transmission Distance: 0.3
PLA PolyTerra Lava Red Transmission Distance: 1
PLA+ Sunlu Black Transmission Distance: 0.6

Swap Instructions:
Start with Hyper White
At layer #20 (1.68mm) swap to Cold White
At layer #21 (1.76mm) swap to Green
At layer #28 (2.32mm) swap to Black
At layer #30 (2.48mm) swap to Lava Red
At layer #31 (2.56mm) swap to Black for the rest.

=================
ELF SANTA COASTER
=================

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.08mm

Filaments Used:
PLA PolyLite Pro Cold White Transmission Distance: 0.5
PLA Creatlity Hyper White Transmission Distance: 13
PLA+ IIID Max Army Green Transmission Distance: 5

Swap Instructions:
Start with Cold White
At layer #40 (1.64mm) swap to Hyper White
At layer #50 (2.04mm) swap to Army Green for the rest.

=================
GREMLINS COASTER
=================

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Pro Cold White Transmission Distance: 0.5
PLA+ IIID Max Tan Transmission Distance: 4
PLA Creatlity Hyper White Transmission Distance: 13
PLA PolyLite Pro Green Transmission Distance: 1
PLA PolyTerra Lava Red Transmission Distance: 1
PLA PolyLite Pro Black Transmission Distance: 0.3
PLA PolyLite Pro Green Transmission Distance: 1
PLA PolyLite Pro Black Transmission Distance: 0.3

Swap Instructions:
Start with Cold White
At layer #3 (0.32mm) swap to Tan
At layer #16 (1.36mm) swap to Hyper White
At layer #18 (1.52mm) swap to Green
At layer #23 (1.92mm) swap to Lava Red
At layer #24 (2mm) swap to Black
At layer #31 (2.56mm) swap to Green
At layer #32 (2.64mm) swap to Black for the rest.