FIX - Elf on a shelf house with lightpole
Remixed by
Boost
19
15
4
Print Profile(1)
0.16mm layer, 3 walls, 20% infill
Designer
9.5 h
5 plates
Boost
19
15
4
0
17
39
Released
Description
FIX - I had a few comments on my design saying that the pole- / sign had a weakspot due to colour changes. And in the same time that there was an unnecessary amount of fillament changes due to colours going all the way through each layer.
Changed this with having the text only going through the first 4 layers (0.2 layer height), and filling the backside.
As an added bonus this almost halved the fillament changes on the lightpole- / sign.
Comment & Rating (4)
All
Print Profile
0.16mm layer, 3 walls, 20% infill
great design. should add the backing plate to the front of the house. when removing the front of the house from the build plate I ended up with a lot of cracks between the colored parts. same with the light post
0
Reply
Print Profile
0.16mm layer, 3 walls, 20% infill
0
Reply
Print Profile
0.16mm layer, 3 walls, 20% infill
0
Reply
Print Profile
0.16mm layer, 3 walls, 20% infill
0
Reply
No more
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld