Simple Little Stand by cwhuffman01

cwhuffman01

Household>Other House Models

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 10% infill

Designer

1.6 h

1 plate

4.2(6)

Boost

Released

Description

A simple little stand I designed up to hold a picture frame. It is designed to hold an object 25 Degrees from vertical, or 75 degrees from the horizontal. I intended for it to be used for holding only a picture frame, but discovered that it could be used to hold a wide variety of objects, such as art pieces, books, smart phones, tables, etc. The stand is roughly 5.75"/146mm tall and can can easily accommodate something 3/8" or 10mm wide. The stand can be modified to suit your needs using the included .STEP file to your liking, or can be scaled to suit within the slicer.

While it was not designed to have this, it may be worthwhile to add some stick-on felt or foam feet to the model, to keep the stand from sliding around on a desk or table surface.

Designed in Fusion 360, Printed on a Bambu Lab P1S using Bambu Lab Cobalt Blue Metal PLA.

Comment & Rating (7)

@BennyBoots

works and looks great. i reduced it for a3.5"x5" photo frame. i also used it standard size for a 8x10" frame. works great! i also used bambu studio Adaptive Layer Height to minimize stair stepping effect. it's amazing. I'll include a photo comparing with and without adaptive Layer height enabled. thanks

(Edited)

@TheKirklands

Print Profile

0.2mm layer, 2 walls, 10% infill

Turned out great and held up a sign that many others would flop over with. Thank you for providing measurements as well, not enough people do that :). It saved me from having to try and scale up some other holders to find one that worked. It's a great size and printed easily. My sign is about 200mm each way and 2mm thick.