Toothbrush Travel Case by angrelou

angrelou

Household>Other House Models

Print Profile(6)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

30 min

1 plate

4.8(77)

0.2mm layer, 2 walls, 15% infill

Designer

25 min

1 plate

4.8(13)

0.2mm layer, 2 walls, 15% infill

Designer

30 min

1 plate

4.3(6)

PETG 0.16mm layer, 2 walls, 15% infill

36 min

1 plate

4.6(5)

Click to see more

Boost

153

274

120

636

988

Released

Description

update 02/11/2024

I uploaded a new model witch solves the problem of the hook breaking when force is applied.

Thanks you all for your comments, making this model better for everyone.

Lately, I've noticed that they always upload the same STL file to all platforms and always encounter the same problem.

I took it upon myself to design a new case that solves the issue all previous models had, which is that they all open too easily.

After several failed attempts, I finally managed to make everything fit perfectly without the need for supports.

At the moment, i only created 3 models, but i will be uploading more models soon

Enjoy the 3D print

As always, have fun, and I'll be uploading more things soon.

(I recommend using pla+)

If you liked the design, check out my profile and subscribe, you won't regret it.

Comment & Rating (120)

@Blsedl

Print Profile

0.2mm layer, 2 walls, 15% infill

because of layers the pin for locking snapped, fortunately the tolerances are good so it snaps good

The designer has replied

@angrelou

That issue has already been resolved, and I've uploaded a new file and, for the kids, one with superheroes

@Blsedl

Replying to @angrelou :

Good job!👍

@xcorella

came out perfectly and works just as intended, great model!! and I really like a good print in place hinge design! awesome

@mfeidler

I gave it a try on my new P1S and the hinge will not fold. It is stuck together. I wish these type of prints were printed as separate parts and then assembled.

@xcorella

I just printed mine and it works perfectly, did you try to break it in? Most print in place hinges are tough the first time and then smooth, I printed 5 of them all came out perfect on my X1C, I think it may be the way you are printing it, its meant to be print in place not separate

@mfeidler

my printer probably needs some calibration. I tried to break it over but the sides just broke and the hinge did not move. I went ahead and printed a different design that was separate pieces and assembled them with a filament string as the hinge pin.

@Fix3d

Print Profile

PETG 0.16mm layer, 2 walls, 15% infill

top

@davidarroyo1234

Print Profile

0.2mm layer, 2 walls, 15% infill

the latch broke, but closes anyways.

@Screech24

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed great!

@malolepszy.mm

Print Profile

0.2mm layer, 2 walls, 15% infill

cool

@laureddd

Print Profile

0.2mm layer, 2 walls, 15% infill

It fits perfectly. The hinges are strong and work very well. Thank You!

@schenk

Print Profile

PETG 0.16mm layer, 2 walls, 15% infill

Very useful :)

@Izzodesign74

Print Profile

0.2mm layer, 2 walls, 15% infill

qualche problema di adesione, si consiglia di diminuire la velocita del primo layer

(Edited)

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(6)

Description

Comment & Rating (120)

License

Related Models

Travel Chess Set

Kids Toothbrush Case - Winnie the Pooh

Best AA & AAA Battery Cases (Compact Travel Cases)

Klick lock container - Diamond pattern