Business Card Box // Visitenkartenbox 85x55 by DocLex

DocLex

Household>Office

GIF

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.16mm layer, 4 walls, 25% infill

Designer

2.8 h

2 plates

4.7(36)

0.16mm layer, 2 walls, 15% infill

4 h

2 plates

4.7(3)

Boost

113

339

319

Released

Description

English version below (machine translated)

Dispenser für ca 12 Visitenkarte (85x55mm), je nach Dicke des Papier. Andere Grössen auf Anfrage. Wenn die Karten aneinander kleben kann das verbesserte Design helfen.

Ein-Teil-Druck. Kein Zusammenbau, kein Support.

Gedruckt mit Bambu Lab PETG-CF, standard Einstellungen. Sieht echt spitze aus. Aber auch andere Materialien sind möglich. (Layerhaftung muss OK sein).

Dispenser for approx. 12 business cards (85x55mm), depending on the thickness of the paper. Other sizes on request. If the cards stick together, the improved design can help.

One-piece printing. No assembly, no support.

Printed with Bambu Lab PETG-CF, standard settings. Looks really great. But other materials are also possible. (Layer adhesion must be OK).

For 91x55 cards:

https://makerworld.com/en/models/249875#profileId-266151

Comment & Rating (47)

@KOAdditiveLabo

Print Profile

0.16mm layer, 4 walls, 25% infill

good job

@Jiaojiao3D

Print Profile

0.16mm layer, 4 walls, 25% infill

Perfect

@repair3D

Great idea, try to make a pattern on the surface.

@Wachhund

Print Profile

0.16mm layer, 4 walls, 25% infill

Ließ sich problemlos drucken und funktioniert perfekt. Probedruck mit PLA.

@hommenouveau

Great design! Can you make one for 91x55mm?

The designer has replied

@DocLex

No problem, take a look... https://makerworld.com/en/models/249875#profileId-266151 I would be happy about a LIKE. Check out my other designs. I would also be happy about one or the other LIKE.

@DocLex

No problem, take a look... https://makerworld.com/en/models/249875#profileId-266151 I would be happy about a LIKE. Check out my other designs. I would also be happy about one or the other LIKE.

@DocLex

No problem, take a look... https://makerworld.com/en/models/249875#profileId-266151 I would be happy about a LIKE. Check out my other designs. I would also be happy about one or the other LIKE.

@homy831

Print Profile

0.16mm layer, 4 walls, 25% infill

不必支撐，名片投放準確。

@user_1624288216

Print Profile

0.16mm layer, 4 walls, 25% infill

Came out great! Could fit about 20 -25 cards inside

@user_2011019172

Print Profile

0.16mm layer, 4 walls, 25% infill

nice model ! print easy

@Z3R0C00L

Print Profile

0.16mm layer, 4 walls, 25% infill

print has failed 3 times in a row with 2-3 minutes left. finally on the third print I watched the temps and the g code is set to turn off heat bed temp at that time and will fall over (not sure exact time heat turns off on the bed)(within the last 10 minutes). Once fixed this is the best print out of 3 other business card holders I’ve printed.

Bed Adhesion Issue

@ScubaPig

Print Profile

0.16mm layer, 4 walls, 25% infill

printed great with no issues

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.