Hi, Either position and print the numbers one by one - or copy & scale the right amount of numbers for each number and fit them to the build plate. :) If you follow the steps down below: STEP 1: Open the ”.3mf” file in your slizer software. STEP 2: Delete/move from buildplate, all numbers besides the desired ones (in your case, keep “3” and “4”). STEP 3: Copy & paste if you want more than one of a certain number. (In your case, make a copy of the number “3” - now you have two of them). STEP 4A: Position and scale the numbers so that they fit onto the print bed. STEP 4B: Alternatively print the numbers one-by-one if they are to big to be printed all at the same time. (In your case print number “3” two times and number “4” one time). Hope this helps - otherwise I can provide you pictures in this chat to showcase how it is done!