I searched for a long time to find a case for the most important piece of my event production gear. Nobody makes one so I decided to model one and here we are. It fits a Decimator MD-HX with 2mm of space one each side, I'll be lining with EVA foam to cushion a bit, but not really needed. It also has a cutout for the Decimator locking power supply. I have not modeled any space for the international power adapters, sorry.

The construction is straight forward, holes are made for M3 screws. The latches are a bit loose, but the case itself has an alignment gasket that helps with the seal.

Ive printed in PLA+ for testing and PETG+ for actual use. The PLA hinges were too fragile. I also didn't want any warping if it has to sit in a hot truck in shipping.

Hopefully you all can get some use out of this as well. I do have plans to adjust for the Decimator 12G-Cross in the future as well as Aja Fidos and Blackmagic micro-converters