Smile Gyro Keychain
Copyright Claim
Smile Gyro Keychain
Boost
18
29
8
Print Profile(2)
0.16mm layer, 3 walls, 16% infill
Designer
45 min
1 plate
0.16mm layer, 3 walls, 16% infill file with Text "JUST KEEP SMILING!!!"
Designer
51 min
1 plate
Boost
18
29
8
0
65
62
Released
Description
Someone at work asked me to make something to fidget with a smile so worked this up in OnShape. Still learning so go easy on my workflow!!! I added the text in the slicer and have included the blank STL as well! JUST KEEP SMILING! I have printed it in both ASA on my Vorons and PLA on the A1 Mini
Link to OnShape if you want to modify tolerances or anything else!
https://cad.onshape.com/documents/58528c8462157a129284bc0b/w/9d3ef65eb3003a18c8a5161d/e/866c9a6a385f0372eadf5e7d?renderMode=0&uiState=65513dd647bdbb5be3ac8e2c
Comment & Rating (8)
All
Print Profile
0.16mm layer, 3 walls, 16% infill
came out great.
1
Reply
Print Profile
0.16mm layer, 3 walls, 16% infill
sehr gut
0
Reply
Really cute, but the tolerance is so tight I could not get it to spin.
0
Reply
Print Profile
0.16mm layer, 3 walls, 16% infill file with Text "JUST KEEP SMILING!!!"
Had a few issues with pieces fusing but they came loose. May be the filament rather than a profile issue.
0
Reply
Print Profile
0.16mm layer, 3 walls, 16% infill
0
Reply
Print Profile
0.16mm layer, 3 walls, 16% infill
0
Reply
Print Profile
0.16mm layer, 3 walls, 16% infill
0
Reply
Print Profile
0.16mm layer, 3 walls, 16% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Share AlikeRelated Models
© 2024 MakerWorld