Han Solo Blaster DL-44
PortedtoReality
Shared by
Copyright Claim
Han Solo Blaster DL-44
PortedtoReality
Shared by
Boost
53
113
17
Print Profile(1)
0.08mm layer, 2 walls, 20% infill
38.2 h
7 plates
Boost
53
113
17
1
211
414
Released
Description
Sharing PortedtoReality's Han Solo DL-44 Blaster model.
I've laid it out on build plates for the X1 Carbon based on filament color and type for the different parts, but the model itself is not mine.
This is the blaster. You can find the stand at: https://makerworld.com/en/models/19557
Comment & Rating (17)
All
Print Profile
0.08mm layer, 2 walls, 20% infill
Great profile, I used some sanding for the rough finish and painted the brown and gold onto some grey filament. It’s for a friend and I know he will love it.
0
Reply
they sell ones that shot .22lr and look real and based off AR platform online . i just think it be cool own a dl44 that shoots 22 half of 44 lol
0
Reply
Print Profile
0.08mm layer, 2 walls, 20% infill
A couple of steps that are best tweaked as follows:
* Step 2. leave off the flash suppressor(7) until the end of the build, otherwise it will catch on the top of the main assembly when you try to slide it into position as per Step 8.
* Step 8 - leave off at least one of the thumbnuts(35) until after you’ve slid the scope assembly (from Steps 6 and 7) into position.
I also had to sand down A LOT of the trigger assembly,
But looks great at the end!
0
Reply
Print Profile
0.08mm layer, 2 walls, 20% infill
aún la estoy acabando pero me encanta el resultado!
0
Reply
Print Profile
0.08mm layer, 2 walls, 20% infill
Had to edit the files a bit in Orca slicer and added m3/m4 hardware to make scope adjustable and everything removable. Fun project and decided to make it my own instead of going for exact prop. Thank you.
0
Reply
Print Profile
0.08mm layer, 2 walls, 20% infill
Turned out really well, had some issues printing some parts but that's all me I had a dirty bed plate.
0
Reply
Print Profile
0.08mm layer, 2 walls, 20% infill
0
Reply
The supports on this is really to tight. I would only recommend printing this directly if you have watersouluble support materials. Or else tweek the settings in Bambu Labs.
The designer has replied
0
Reply
That makes sense. I used the Bambu Support W for the support interfaces which is why they are so tight.
0
Reply
can't wait to paint
0
Reply
Print Profile
0.08mm layer, 2 walls, 20% infill
0
Reply
Print Profile
0.08mm layer, 2 walls, 20% infill
0
Reply
The user shared this model, but is not the original creator of it.
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld