Super Scooper² - No Supports by TripleGWorkshop

TripleGWorkshop

Tools>Hand Tools

Print Profile(5)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

Heavy Infill & Thick Walls - 0.24mm layer, 3 walls, 25% infill

1.5 h

1 plate

4.9(78)

0.2mm layer, 2 walls, 15% gyroid infill

1.5 h

1 plate

5.0(20)

85% scale @ 0.2mm layer, 2 walls, 15% infill

1 h

1 plate

4.8(4)

0.6mm nozzle, 0.3mm layer, 4 walls, 10% infill

13.3 h

1 plate

5.0(1)

Click to see more

Boost

254

444

118

918

874

Released

Description

The original, Squared! Prints with NO Supports + scale to ANY SIZE! For pet food or anything! Sturdy with comfort grip.

Scale to ANY SIZE - it prints without supports!

Printing on it's face allows for larger sizes & makes the bottom stronger with diagonal layers.

The Super Scooper Squared has an oversized grip based on user feedback.

Original Super Scooper https://www.printables.com/model/437036-super-scooper-no-supports

Round Scoops! https://www.printables.com/model/437874-round-scoops-no-supports

90° Corner scooper: https://www.printables.com/model/437613-corner-scooper-no-supports

Pet Litter Scoop: https://www.printables.com/model/441731-pet-litter-scooper-no-supports

Comment & Rating (118)

@Marche

Print Profile

0.2mm layer, 2 walls, 15% gyroid infill

Nice! Had some spare green filament to finish and I got an unexpected watermelon look

@PrintzByJ

Print Profile

0.24mm layer, 3 walls, 28% adaptive infill etc.

Perfect as a dog food scoop!

@alan.anthony1

Print Profile

Heavy Infill & Thick Walls - 0.24mm layer, 3 walls, 25% infill

Very good and easy to print. The first one was a bit small (the dirty one in the picture) so I printed 2 more at 150% scale and they are perfect. They seem to be very strong too. I will be using them to scoop Perlite and Vermiculite into my compost. I will likely print a few more so I have some at home and some down at the allotment.

@rubywong121

Print Profile

Heavy Infill & Thick Walls - 0.24mm layer, 3 walls, 25% infill

Nice

@josteb

Print Profile

0.2mm layer, 2 walls, 15% gyroid infill

good model

@ewittenstein

Print Profile

85% scale @ 0.2mm layer, 2 walls, 15% infill

Love this!

@massimilianocof

Print Profile

Heavy Infill & Thick Walls - 0.24mm layer, 3 walls, 25% infill

good job

@PeterHall

Print Profile

Heavy Infill & Thick Walls - 0.24mm layer, 3 walls, 25% infill

Thanks for this model, very nice. my print wasn’t great but good enough. struggled with this PETG. scaled to 135%, inner brim and with a tad slower first layer. will use it to spread sand on an icy driveway.