Medieval full plate armor for DUMMY 13 Remixed by Martin Kozak

Remixed by

Martin Kozak

Toys & Games>Characters

Print Profile(5)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

Frame parts PETG - P1P

Designer

53 min

1 plate

4.8(58)

Armor parts PLA - P1P

Designer

2.9 h

2 plates

4.7(55)

Frame parts PETG - A1 Mini

Designer

1 h

1 plate

4.9(10)

Armor parts PLA - A1 Mini

Designer

3 h

2 plates

4.7(22)

Click to see more

Boost

806

1208

168

1.8 k

2.1 k

Released

Description

Print instructions for frame

To achieve wider range of movement, I had to modify 4 pieces of frame parts. Don't forget to print them. Rest of the frame parts are the same as the original DUMMY 13. It is recommended to print frame from PETG.

Print instructions for armor

0.2 mm, 3 perimeters
Parts are pre-oriented to the printbed.
Some armor parts require supports. Namely: armor_helmet.stl, armor_hip_left.stl, armor_hip_right.stl, armor_chest.stl, armor_knee_left.stl, armor_knee_right.stl, armor_visor.stl
For your convenience, use provided 3mf files with all the necessary parts and settings for Bambu

Assembly

For assembly, please follow BUILD GUIDE. Some steps are slightly different from the original. Note: kneepads might use a drop of glue to hold better in place.

Comment & Rating (168)

@mailnw555

i print with wrong color (esun pla)so i decide to shoot him with airsoft gun 15 round (.22g320fps)=kinetic energy=1J i expected a big explode of him but i am surprised by how strong warrior spirit he had he still held up fine (compared with his size it like been hit by cannon 15 time)

@Surreal

looks badass

@Maddox_3Dprints

that is awsome

@user_2247645423

Added some laser etching to the shield (PLA material, laser is a diode 20W at 55% engrave). The texture of the markings are glittery looking, which is an unintended outcome, but pretty neat to see in person. I plan to do a lot more with both techs in the future

(Edited)

@Technologily

Armor Esun PLA Silk Bronz Frame Creality PETG

@P1S3dPhoenix

Fixed, I had the wrong base model! Sorry about that. This guy actually works great! Thank you for this! There seems to be a discrepancy in size. I printed the original lucky 13 in 175% size, then printed this outfit in 175% but the armor appears to be too small and not compatible.

(Edited)

The designer has replied

@MartinKozak

There is no discrepancy. Armor is for DUMMY 13, not Lucky 13

@P1S3dPhoenix

Replying to @MartinKozak :

Sorry about that, I feel like a real dummy 😂

@metteking

模型设计很巧妙，效果很棒，但是组装的时候请注意，关节连接处有点紧，需要涂抹润滑油，The model design is very clever and the effect is great, but when assembling, please note that the joint joints are a bit tight and need to be lubricated.

The designer has replied

@MartinKozak

Thank you. To my defense: a) I didn't make the joints, original creator did b) I had no problem with joints at all, maybe try calibrate your flow. c) joints will became smoother during use.

@MartinKozak

Btw, it looks like it's scaled up? If so, then this is the problem; joints are fine in 100 % scale

@Kdans3

Print Profile

Armor parts PLA - P1P

A little tricky to put together, but an awesome result. Definitely make sure to print the dummy body in PETG.

@Chiefkiller

Print Profile

Armor parts PLA - P1P

scaled up to 250%

@mrmike

Print Profile

Armor parts PLA - P1P

The Knee's tested my paitence, but overall a killer print. Thank you. Kingroon PETG for the frame and Kingroon PLA for the Armor.

@HotFix

Print Profile

Armor parts PLA - P1P

Getting the knees to fit on was a bit of a chore, part of the reason being and I had to reprint them a few times until one was close enough that it would work. I think I have filament quality issues on the PLA side. Otherwise this is a great model, shows you put a LOT of effort into it, and I am really grateful there are designers like you out there who take the time to not only design something this awesome but put together detailed instructions on how to assemble it. Thank you!