Calibration Cube
Remixed by
Copyright Claim
Calibration Cube
Remixed by
Boost
29
45
88
Print Profile(4)
20x20x20
Designer
15 min
1 plate
15x15x15 0.2mm layer, 2 walls, 15% infill
Designer
13 min
1 plate
60x60x60
Designer
32 min
1 plate
0.08mm layer, 2 walls, 15% infill
Designer
30 min
1 plate
Boost
29
45
88
0
667
1.1 k
Released
Description
A perfect simple calibration cube that also tests overhangs with its 45 degree overhanging edges, I've also added a cube with no overhangs if you want.
20mm x 20mm x 20mm
- 0.2mm layer height and a 0.4mm nozzle
- 20% infill
- 100% fan speed (except first layer)
- 2 perimeters
Enjoy!
Please Like :)
Comment & Rating (88)
All
Print Profile
15x15x15 0.2mm layer, 2 walls, 15% infill
No real issues with the very small cube test model. used Bambu Silk Silver PLA with the stock XC1 settings
0
Reply
Print Profile
20x20x20
not bad
0
Reply
Print Profile
20x20x20
worked good
0
Reply
Print Profile
20x20x20
it’s a cube what more can you say
The designer has replied
1
Reply
well that’s is true ;) but it is useful
0
Reply
Print Profile
20x20x20
not sure if it has anything to do with the profile but my ams couldn't upload after this print
The designer has replied
0
Reply
that’s a software problem . not from ams happens also for me
0
Reply
the firmware update literally just fixed it for me
0
Reply
Print Profile
20x20x20
printed well. when tells me my A1 is calibrated
1
Reply
Print Profile
15x15x15 0.2mm layer, 2 walls, 15% infill
As expected. Calibration cube as we know it.
1
Reply
Print Profile
20x20x20
Print didn't have the 45 degree overhang as advertised...
Otherwise very good.
0
Reply
Print Profile
20x20x20
perfect for quickly testing a filament
0
Reply
Print Profile
15x15x15 0.2mm layer, 2 walls, 15% infill
.
0
Reply
Related Models
© 2024 MakerWorld