Printed perfect first time with no adjustments. The holes for the magnets perfectly fit the 6x3mm ones I had hanging around. the side walls felt a bit flimsy to pressure. My only concern would be if it got banged around too much in transport by anyone not paying quite enough attention. Next try will be with 3 instead of 2 walls on the print and slightly higher infill (15% first time around).
I have noticed that myself, I am in the process of thickening the walls for the box and will release an updated version, unfortunately this means a new lid will be needed also so will release that soon! thank you for the feedback :)
Beautiful box, the fitment of the magnets is perfect.
1 thing not related to the model in anyway, but the pattern from a previous print shows on the surface as a slightly different texture on the top. Using the stock Bambu textured PEI sheet without glue. Make sure to wipe down your plate before printing because trying to get rid of it with sanding/clear coat has been a pain.