Activated charcoal and Hepa filter for Bambu X1C Exhaust Filter
Copyright Claim
Activated charcoal and Hepa filter for Bambu X1C Exhaust Filter
Boost
3
11
4
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
37 min
1 plate
Boost
3
11
4
0
15
12
Released
Description
Designed to replace the stock activated charcoal block filter with a combo of hepa and activated charcoal cloth. This was designed for using the following items:
Hepa filter: https://www.amazon.ca/dp/B07HHQKJ4G?psc=1&ref=ppx_yo2ov_dt_b_product_details
Activated Charcoal: https://www.amazon.ca/dp/B00AESC8VW?psc=1&ref=ppx_yo2ov_dt_b_product_details
Cut two strips to size of the charcoal cloth. Replace on a monthly basis.
Comment & Rating (4)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
printed in ABS, works well. only downside is that the holes are a little too big, will need to place HEPA filter on it first before activated carbon
The designer has replied
0
Reply
You can use activated charcoal cloth instead of the loose charcoal. Amazon Carbon Pre-Filter 38002,... https://www.amazon.ca/dp/B00AESC8VW?ref=ppx_pop_mob_ap_share
0
Reply
Replying to @user_3154573340
oh! thanks for sharing!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial
© 2024 MakerWorld