Just a simple No Entry sign for a bedroom or generally anywhere you prefer a knock ….
I know it’s simple, it’s my first shared design - be Gentle… thanks for the likes!

I kept it fairly thin, but wanted some rigidity for it to hang properly and not flap with the slightest breeze and tap on door.

Letters annd logo are raised slightly more than normal sign for the added effect and more surface area if used for glow in the dark effect.

• Standard Bambu Print speed (100%) was used, Gyroid Infill 15%, 2 walls, 0.2mm First Layer
• Standard 0.16 Optimal, 0.12 Fine work well for Quality settings.
  OR
• For a super clean professional finish, I used 0.08 Extra fine + Ironing on all top surfaces..

Disclaimer

My example was printed with Bambu Labs PLA Black and PLA Glow Green, however my environment is cool and out of the sun, please adjust your filaments types as required for your environment. A melted door hanger is never fun and could lead to all sorts of unwanted entry :P
In other words, I am not liable for any sibling rivalry, missed deliveries or any other issues arising from use or mis-use of this sign. Enjoy.

Produced on Makerworld ~ Make my Sign, as my original design based on hanger template.

I printed using Bambu Labs PLA Glow Green for the letters and logo for added effect at night time bedroom doors!