Removable primer catcher box for the legacy CH "H" Reloading Press. Single stage model.

The old CH “H” Reloading Presses are fantastic single stage presses. They're built like tanks and are quite fast and smooth by design. I use one as a dedicated de-capping press with Lee Universal De-capping die. Problem is, there's no included way to collect the spent primers and I would just sweep or vacuum them up from the floor and bench.

This primer catcher will hook-on from the back of the press. If properly printed and installed, a shell holder can be removed or installed with the catcher in place.

Print in the orientation as the model is in the STL. I suggest painting on supports as shown in the 3rd photo, just the horizontal overhangs and the sharp angle of the back. Didn't make a difference with or without support in the hole for the shell holder.

Model shown printed in Polymaker PolyLite PLA Pro.