** PROJECT NOTE: While this is a COMPLETE SOLUTION. It may not be perfect, improvements can be made with extra supports etc. To remix I didnt have the original step file so I had to make do with slicer additive and negative parts.

Make sure you have clean edges on both parts of the quick connector if its not twisting on.

Twist Lock Taken from https://makerworld.com/models/124234

Exhaust system for X1 and P1S, uses a 4' hose with twist connector for easy removal during maintenance. Exhausts fumes from MC and Chamber grills. Air intake happens through the poop cute. Make sure to remove the carbon filter as it restricts airflow and isnt needed when venting.

Simply tape or glue both pieces together where the small square tunnels meet. Then screw once side in over hte exhaust MC hole and one side over the chamber fan hole. Attach the quick connector to your 4' hose and twist it onto the connector.

I used this with a 6 inch inline fan using this coupler:
https://makerworld.com/en/models/151374

and this splitter to cover 2 P1S printers:
6' to 4 inch Splitter for ducting or PVC by YourGuyMike - MakerWorld

Im not an airflow expert by any means so this may not be optimal, but it works for me and has more than enough flexibility to be used with more and more units by using couplers to an inline fan. I put more effort into making these prints functional rather than pretty so they can probably be improved with better profiles.