Coffee Knock Box V2 by hYPERfOCUS

hYPERfOCUS

Household>Other House Models

GIF

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

RECOMMENDED - variable walls and infill on one build plate.

Designer

6.4 h

1 plate

4.9(32)

Boost

152

250

218

Released

Description

This is V2 of my coffee knock box design which includes a puck splitter, and now also a splash guard. This is a two part print that click together, but are better glued together.

Comment & Rating (40)

@RaGo_awesome

Print Profile

RECOMMENDED - variable walls and infill on one build plate.

Nice one! But dude, need your credentials be that big? 😅

The designer has replied

@hYPERfOCUS

It's on the bottom where it will never be seen. And it needs to be big to compensate for my crippling insecurities 🤣

(Edited)

@HotKife

lower z to be a couple of mm under print bed level?

@SevenxMinutes

Print Profile

RECOMMENDED - variable walls and infill on one build plate.

worked great! I disabled support for the top of the bean, and it didn't have a negative impact on the print.

@f6bzf2pcnz

Print Profile

RECOMMENDED - variable walls and infill on one build plate.

Nice print but takes quite some time and filament for the print ( I Used some rest spools for it)

The designer has replied

@hYPERfOCUS

yeah it needs to be able to take a bit of a beating. I think this is the minimum density for the application.

@fatally.bored.g

Print Profile

RECOMMENDED - variable walls and infill on one build plate.

Was too eager to use it, couldn't wait for a picture. haha, very good. Now my morning espresso is hassle-free clean up!

@ACEHOLE3D

Print Profile

RECOMMENDED - variable walls and infill on one build plate.

Tested this past weekend while making espresso martinis. Held up great and was easy to clean and reuse!! Awesome!

@LoamRiver

Print Profile

RECOMMENDED - variable walls and infill on one build plate.

Works absolutely perfectly. Way better than what I was doing.

@goncasfalcao

Print Profile

RECOMMENDED - variable walls and infill on one build plate.

Strength Issue:After a few uses it broke on the links between the two parts

@BigChungus

Print Profile

RECOMMENDED - variable walls and infill on one build plate.

@SomethingKlever

I like this and the other version. However, I use a puck screen. Are you able to install the bar in such a way that the splitter is upside down? Or, are you willing to throw up a mod that doesn't include the splitter bump on the rod? Also, before I print. Would you mind sharing the width of the box, and overall height? The depth isn't an issue, but I have a two-tier shelf I store my existing box on (breville version). I've been looking for a low wall/front replacement. This looks perfect, I just want to make sure it doesn't exceed the existing size. Thanks.

The designer has replied

@hYPERfOCUS

I'll make a mod and reply when it's done. 👌

@SomethingKlever

Replying to @hYPERfOCUS :

This community is the best! Thank you.

@FrankFurz

Print Profile

RECOMMENDED - variable walls and infill on one build plate.

Nice Model, i printed it 90% size probably 80% would be enough to. For very compressed cakes the splitter does not split because of the flex. Thank you very mucho :D

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.