Hotend enclosure for Creality Ender printers. This was originally designed for an Ender 5 Plus with BL Touch sensor. The stock part cooler was swapped for this one - https://www.thingiverse.com/thing:4112253

This was all printed in PA6-CF. Fit is nearly perfect - you may have to make sure the screw holes are fully open. All screws will screw into the part. This also has a mount on the top for the Creality Sonic Pad XY sensor for input shaping/resonance tuning. The front part just raises the intake slightly to reduce the whispy plastic bits that eventually make their way into the fan.