(Mischievous) Olaf (Fanart) by Randomizy

Randomizy

Toys & Games>Characters

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

(4 colors) 0.2mm layer, 2 walls, 5% infill (Textured PEI)

Designer

16.6 h

1 plate

5.0(1)

A1mini (4 colors) 0.2mm layer, 2 walls, 5% infill

Designer

17.8 h

1 plate

(3 Plates)(Splitted Parts)(3 colors) 0.2mm layer, 2 walls, 5% infill (Textured PEI)

Designer

7.8 h

3 plates

1.0(1)

A1mini (3 Plates)(Splitted Parts)(3 colors) 0.2mm layer, 2 walls, 5% infill

Designer

8.4 h

3 plates

Boost

118

Released

Description

EDIT 28 January 2024

One of you pointed out that there was a bug in the Olaf hair files where the joints were displaced from the mesh, so I have now uploaded the correct files for each of them.

Please let me know if everything works now and if you ever run into any other problems.

Thanks a lot for your feedbacks, they're really important to me!

- - -

Olaf, the animated snowman from Disney's Frozen, strikes a playful and charming pose. With one arm confidently resting on his hip, he exudes a whimsical confidence that is both endearing and mischievous 😏

His carrot nose points upward, adding a touch of mischievous and cheeky charm to his expression, while his anthracite eyes sparkle with a hint of light-hearted mischief.

This evocative pose captures Olaf's unique blend of innocence and mischievous charisma, creating a whimsical and enchanting moment frozen in time ❄

---

Check out Olaf - Summer Diorama (Fanart) to enjoy this little guy in a different version.

---

Size: 12,5 x 9 x 10 cm (W, L, H)

Supports needed.

---

It comes with separate parts + full figure

---

For any inquieries, please don't hesitate to contact me.

---

Please don't be shy and upload your make!

(If you share it on your socials, please be sure to tag : @randomizy.3d [FB / IG] ; @randomizy3d [Twitter / Tik Tok] so that I can see it!)

---

Check out my Instagram to see all of my works: https://www.instagram.com/randomizy.3d/

---

If you like my work and would like to support me so that I can bring you new content, receive exclusive benefits and models, and you're interested in having a commercial license for selling your physical printouts of my designs (not files), please consider checking out my link: https://linktr.ee/Randomizy

Documentation (4)

Other Files (4)

LICENSE.txt

Files Size.txt

Files Tips.txt

README.txt

Comment & Rating (8)

@adbirchall

Hi am having trouble with slicing the parts of the arms and head hair for the split model there an error is empty layers around bottom. i try redownloading and using different slicers, I have try to print it but simple fails and prints a mess

The designer has replied

@Randomizy

Hi adbirchall! Thank you for contacting me to let me know about the problem you were having with your print. One of the reasons you were getting a messy print was mainly because I forgot to update the print profile with the fixed head hair files (which were accidentally corrupted when I uploaded them). Thanks to you, I've now updated the correct files, so you shouldn't get a messy print anymore. As for the error message for the Olaf_Arm_L, it shouldn't really be a problem because I got that too and mine printed fine. I think the message might be due to the orientation I gave the part, which creates a thinner wall for the part near the joint. Anyway, please let me know if everything works now and if you ever run into any other problems. Thanks again for your feedback, it's really important to me!

@user_4131006079

Great work. Thank you for sharing. Enlarged him 200%. And just now found out that you have a whole beach-set that matches... 😍😍

@flashtu1980

Print Profile

(3 Plates)(Splitted Parts)(3 colors) 0.2mm layer, 2 walls, 5% infill (Textured PEI)

printed all parts seperate, some fit some wont and the support removing is a pain in the ass i broke the ams twice before i get rid of the support.

The designer has replied

@Randomizy

Hi flashtu1980. I'm sorry to hear that you had problems with the files. Everything should fit, but as I wrote in the "Files Tips" document, the result of the tolerance for each piece can vary based on your printer/filament/resin/slicer settings, so that may be the reason why some pieces fit better than others. As for the supports, I personally didn't have too much trouble removing them when I test-printed mine, they came off pretty easily. The only files that might be a little tricky are the hair, not the arms where they're actually quite thick compared to the hair. If you want to give it another try, I suggest you make some slight tweaks to the settings and change the ones that might have more of an impact, like maybe using 3 layers for both the top and bottom interface layers for the support settings (which I currently use for my prints), or any other settings you think might help get a better printout. Again, I'm very sorry about this. Please let me know if you print it again and if I can help in any way.

@user_1733408752

Getting warning message when loading model that studio needs update but I am on latest version for mac.

The designer has replied

@Randomizy

Hi there! How weird, I never got that message when I first opened my design there not when I shared the profiles here, but now I got that warning message too when I open it 😥 (windows). Thankfully it still works once you click on the "OK" button. I really have no idea why it suddenly gives that warning message now 😥 Maybe it's some sort of bugs and hopefully will be fixed soon. I'm sorry for this inconvenient, I wasn't aware of it either.

(Edited)

@smartsped

Print Profile

(4 colors) 0.2mm layer, 2 walls, 5% infill (Textured PEI)

No more

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Head Collection - 8 Brick Figure Heads

BigBricks

Clone Trooper - Big Brick Figure

BigBricks

156

262

Darth Maul - Big Brick Figure

BigBricks

121

Charmander Hueforge Red

x4mp0