Mason Jar with no markings - Super tall 250mm
Copyright Claim
Mason Jar with no markings - Super tall 250mm
Boost
22
31
13
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
Designer
29 min
1 plate
0.2mm layer, 1 walls, 0% infill
Designer
1.7 h
1 plate
Boost
22
31
13
0
59
44
Released
Description
This super-tall version of the mason jar is handy for storing long items - such as zip ties.
The jar is 250mm high (around 10").
Comment & Rating (13)
All
Print Profile
0.2mm layer, 1 walls, 0% infill
Awesome for a quick huge jar/bottle that isn’t intended for any major abuse. I printed mine in Matte PLA (Bambu) and it’s specifically for all my PLA poops, and since it’s made from PLA, when I do eventually recycle the poops, it can all go as one.
I will be printing more of these (and the lids) in various materials for organization of the turds in their respective materials. it will be a turdfest, you might say.
The designer has replied
0
Reply
What a great idea! Thanks for taking the time to take the photo, and description of the upcoming festival.
(Edited)1
Reply
Replying to @EveryDayCounts
Lol! You're welcome :) Don't mind the little blemishes on the outside either, that was just me trying to make some lettering way too thick
0
Reply
Great model with consumer level detail.
My bottom layer appears to be "weeping" (leaking slowly). Would increasing the bottom surface layers and using rectilinear solid infill solve this? Any tips?
Thanks
@EveryDayCounts
The designer has replied
0
Reply
Thanks for reaching out.
This model is printed in 'vase mode', so there is only a single wall and no infill, which makes it unsuitable for liquids. I would guess that the area of issue would be where the solid bottom layers join the start of the single-wall section.
I have a 'solid' version of this jar, which is watertight but not at this height (ATM). See [The Tough Mason](https://makerworld.com/en/models/75458#profileId-79964).
I will put it on my 'to-do' list to create a solid version and notify you when it is posted.
0
Reply
Hi, @stevehendler.
I have now posted SOLID models for each of the mason jars. These will be definitely not weep.
See them at https://makerworld.com/en/models/389161#profileId-290116
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Goes great with the quick mason jar (see my review for that) or the regular mason jar. Can be hecka sturdy depending on your infill settings.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
lid was great, jar was far too flimsy with only 1 row of filament.
(Edited)0
Reply
Print Profile
0.2mm layer, 1 walls, 0% infill
The designer has replied
0
Reply
@Sw7897897 Thanks for the great review on the tall mason jar.
0
Reply
Print Profile
0.2mm layer, 1 walls, 0% infill
0
Reply
Print Profile
0.2mm layer, 1 walls, 0% infill
Strength Issue:should be two layer at least - broke with the slightest bit of pressure.
0
Reply
Print Profile
0.2mm layer, 1 walls, 0% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld