Back when The Mandalorian first came out, I was obsessed with how adorable Baby Yoda (Grogu) was! I made up some easy ornaments using a combination of Silhouette Studio and Tinkercad that are inspired by them!

Originally, I had the ornament have a smooth top and color changes every layer, but this wastes a lot of filament and makes it more fragile, so I recently changed it up so the color changes are between layers instead! Much easier, more stable, and cheaper filament and time-wise.

The one with Baby Yoda only, has 4 colors and is straightforward to print.

The Mandalorian and Baby Yoda one has 5 color changes and if you are using 1 AMS (like me and the Print Profile attached), you need to swap out the Gold for Brown once it is done printing the Gold. Then, when it gets to the last color change, the AMS will go back to that first color that you have already swapped out of your machine.

Ironing looks nice on these prints.

The back of the Mandalorian and Baby Yoda one is gold, the same color as the hazy sun. The back of the Baby Yoda one is silver, the same as the frame.