Photobox: Take professional photos of your creations (V3!) by maxaruta

maxaruta

Household>Office

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

Single color - 0.2mm layer, 2 walls, 15% infill

Designer

12.7 h

1 plate

4.8(8)

0.2mm layer, 2 walls, 15% infill

Designer

17.2 h

1 plate

4.8(5)

X1C - Single Color

11 h

1 plate

5.0(2)

X1C - Multicolor

14.4 h

1 plate

5.0(1)

Boost

280

458

498

Released

Description

Model

This photobox features a 360-degree rotating base, which allows you to take photos from any angle.

It is also fully customizable, thanks to the variety of wall styles available. (see my profile for other version!

With my photobox, you can significantly improve the perceived quality of your products to your customers.
Your photos will be more professional and engaging, and your customers will be more likely to purchase them.

Download the model today and start taking professional photos of your creations!
_____________________________

Ti presento la mia nuova photobox, lo strumento perfetto per creare fotografie professionali delle tue stampe e creazioni.

Questa photobox è dotata di una base d'appoggio ruotabile a 360 gradi, che ti permette di scattare foto da qualsiasi angolazione.

Inoltre, è personalizzabile al massimo, grazie ai vari stili di pareti disponibili sul mio profilo.

Con la mia photobox, potrai migliorare notevolmente la qualità percepita dai tuoi clienti dei tuoi prodotti. Le tue foto saranno più professionali e accattivanti, e i tuoi clienti saranno più propensi ad acquistarli.

Scarica il modello subito e inizia a scattare foto professionali delle tue creazioni!

Comment & Rating (20)

@cindy.bardalou

Boosted

Print Profile

X1C - Multicolor

Great print

@BRAMZ_

Print Profile

Single color - 0.2mm layer, 2 walls, 15% infill

I use it all the time. Awesome print.

@reluctantbaker

Print Profile

Single color - 0.2mm layer, 2 walls, 15% infill

Came out very smoothly. Printed in PETG, no issues whatsoever. I used the purple glue stick for adhesion/breakaway. Really functional for reasonable sized prints.

@NDZDigital

Print Profile

Single color - 0.2mm layer, 2 walls, 15% infill

Great print. Just what I was looking for.

@ImRayt

Print Profile

Single color - 0.2mm layer, 2 walls, 15% infill

Other Issues:Main piece infill does matter I had use cubic infill, and it shows whenever light hits it, the smaller piece I printed in tpu but it seems like an issue with the other one I printed as well but the inner lip creates a severe overhang, perhaps a filet or chamfer would reduce

The designer has replied

@maxaruta

You basically changed the settings and you're taking it out on me by putting a bad review? veramnete unconscionable.

@ImRayt

Replying to @maxaruta :

it was actually supposed to go to a remix, the preset you had was close to stock as well.. with a couple of tweaks so as far as the changes I did make to print the center piece in tpu and actually upside down so I didn’t have to use any supports, tpu is a very stringy filament so I reprinted in a different one and only had the inner lip be an issue, as far as the infill is concerned the only way around that would be increase the walls which adds significantly to print time. I was actually going to change it to a 4/5 star when I got home from work but nah, it’s a great design and model though..

@maxaruta

Replying to @ImRayt :

Thank you! if you need any help please dm me!