3D Christmas ornaments! You can use string or ornament hooks to hang them.
I used marble PLA and it works great because its rough provides great friction to get the parts to stay together tight. If you are using silk or slippery PLA you might have issues getting the ornaments to stick together. If this is the case then you can add a very very thin piece of tape inside one of the slots (that way it can be removed for packing) or a dab of glue indide one of the slots.
You can print all of the ornaments on 2 build plates or print single ones.
There are print profiles for all of the single ornaments.
If you want ironing you'll have to enable it, as I've disabled it.
These models take time and work to get right, I do this for fun and not business but if you want to support me or show gratitude and buy me a coffee I'd be Extremely grateful! https://www.buymeacoffee.com/eier
Thank you