Multiboard Screwdriver Holder
Copyright Claim
Multiboard Screwdriver Holder
Boost
11
43
8
Print Profile(2)
0.2mm layer, 3 walls, 15% infill
Designer
2.1 h
1 plate
0.2mm layer, 3 walls, 15% infill - lower version
1.7 h
1 plate
Boost
11
43
8
0
89
37
Released
Description
Tired of digging around for your screwdrivers in your messy workbench drawer? Hang them on your Multiboard, so they'll always be easy to find.
Holes are sized for screwdrivers with a shaft up to 15mm (0.6in)—extra deep for added durability and stability. Holes are distanced to make it easy to grab screwdrivers with large handles.
Print upright with no supports at 0.2mm layer height with three walls for optimal strength.
Requires 3 "9 mm Small Thread, Plain Head, T-Bolt" to mount to your Multiboard, which may be obtained from "Keep Making" on Thangs.
Comment & Rating (8)
All
The print profile is no longer public
schönes stabiles Modell, die Schrauben sollten von den Griffen etwas kleiner skaliert werden oder die Löcher der Aufnahmeplatte etwas weiter oben platziert sein damit sie besser eindrehbar sind
The designer has replied
1
Reply
Sorry, I accidentally uploaded my first profile, it’s since been corrected.
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
0
Reply
Any chance of modeling something like this for 1 screwdriver?
The designer has replied
0
Reply
Had some free time this evening and decided to design a single cavity tool holder that will work for a single screwdriver. You can get it here: https://makerworld.com/en/models/151465#profileId-165353
0
Reply
Replying to @DabooDesignsLLC
King thanks a lot!!
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial
© 2024 MakerWorld