I am a big fan of Joker and his smile, so here is a filament painting of him :)

This model is 6mm in depth, so it will take quite some time to print, please use a tight brim to keep it on the printer bed and avoid wrapping.

I am using bone white to add one more layer of shadow, feel free to skip this if you don't like the yellowish tint.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

• PLA Overture Black
• PLA PolyTerra Charcoal Black
• PLA Overture Cement Gray
• PLA+ Sunlu Gray
• PLA Overture Light Gray
• PLA+ Esun Bone White
• PLA+ Sunlu White

Swap Instructions:

Start with Black

• At layer #16 (1.36mm) swap to Charcoal Black
• At layer #20 (1.68mm) swap to Cement Gray
• At layer #24 (2mm) swap to Gray
• At layer #28 (2.32mm) swap to Light Gray
• At layer #34 (2.8mm) swap to Bone White
• At layer #44 (3.6mm) swap to White for the rest.