Cube Gear *fidget* Remixed by RB1105

Remixed by

RB1105

Toys & Games>Other Toys & Games

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.08mm layer, 2 walls, 15% infill

Designer

4.2 h

2 plates

4.8(25)

Quicker rotation, 0.2mm layer, 2 walls, 15% infill

Designer

2.4 h

2 plates

4.7(12)

Boost

112

228

418

Released

Description

Based on this thing: 213946. Also found on Printables 240274. I was surprised to not see one on here so here it is.

Blank model, dropped onto two plates.

I printed gears in Extra fine default settings, and then the pins and center in Strength. No support needed. If you have adhesion issues add a brim.

I have made a lot of these, people at my work love them. I add a bit of lithium grease on each pin before inserting to make it easier to spin in the beginning. The more you spin this the smoother it gets, I have one on my desk for about 2 years now and it's super smooth.

8 pins, 4 small gears, 4 big gears, and 1 center piece. I'll pop all 8 pins into the center piece. Then start with the larger gears, get proper alignment as you go and before you click in the last gear.

Comment & Rating (42)

@Nitros

Print Profile

0.08mm layer, 2 walls, 15% infill

Thanks !

@user_2475828352

Print Profile

0.08mm layer, 2 walls, 15% infill

Printed smooth in PLA silk… nice.

@miziomon

Print Profile

0.08mm layer, 2 walls, 15% infill

perfect fit.

@bollekeil

Print Profile

Quicker rotation, 0.2mm layer, 2 walls, 15% infill

turned out great at 80% 👍

@TempuraTempest

Print Profile

0.08mm layer, 2 walls, 15% infill

Turned out great and turns smoothly even without any lube!

@der_homer

Printed on Anycubic Kobra 2. Great Model. No problems. The stand in the first picture is this: https://makerworld.com/en/models/211017

@Nitros

Print Profile

Quicker rotation, 0.2mm layer, 2 walls, 15% infill

I wanted to print this model for a long time: I am not disappointed... A big thank !

@nicolo.dallolio

Print Profile

0.08mm layer, 2 walls, 15% infill

inizialmente é meglio lubrificarlo con olio, ma con il tempo si smolla ed é veramente un finget spinner fantastico, nonché un bellissimo offerto da tenere a portata di mano, bellissimo.

@Stevetalkowski

Turned out great! I had to reprint the small pins due to bad bed adhesion on a few of them, so added a brim and just reprinted fine. P.S. I simply can not find a way to post a rating for this profile. I give it 5 stars.

(Edited)