Printbed filament spool adapter ring
Copyright Claim
Printbed filament spool adapter ring
Boost
18
18
17
Print Profile(1)
0.16mm layer, 10 walls, 15% infill
Designer
41 min
1 plate
Boost
18
18
17
1
73
122
Released
Description
Just uploaded the updated version with slightly thicker ribs, rounded corners, and easier fit in the center hole.
I designed these rings to fit the cardboard spools for Printbed filament. I got tired of the cardboard dust and wobble that you get from spools with dented edges. The ring snaps into the center of the spool and has 3 teeth that dig in and prevent it from slipping. I have tested it on 8 spools so far without issue. No more errors because the spool slipped and couldn't retract.
Printed in Printbed black PLA on textured PEI plate. Original model was drawn in Fusion 360
Comment & Rating (17)
All
Print Profile
0.16mm layer, 10 walls, 15% infill
Perfect fit for PrintBed Spools!!!
0
Reply
fantastic Spool!!!!
0
Reply
Print Profile
0.16mm layer, 10 walls, 15% infill
Works great. Have one that doesn't fit great because the cardboard spool is a little small but all the rest fit perfectly.
0
Reply
Print Profile
0.16mm layer, 10 walls, 15% infill
Works perfectly for my Printbed spools.
0
Reply
Print Profile
0.16mm layer, 10 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 10 walls, 15% infill
good print! but I think it need to be reinforced in the middle a bit for switching to new rolls. printed a set the other day and snapped a bit. but all that middle ring fit super nice!
The designer has replied
0
Reply
Thanks, I will make it a little thicker and upload in a bit. I noticed the same thing when swapping them onto new rolls.
0
Reply
Print Profile
0.16mm layer, 10 walls, 15% infill
Perfect fit right out of the printer. Thank you for sharing!
0
Reply
Print Profile
0.16mm layer, 10 walls, 15% infill
fit my spools perfectly.
0
Reply
Print Profile
0.16mm layer, 10 walls, 15% infill
works like a charm and prints fast and easy
0
Reply
Print Profile
0.16mm layer, 10 walls, 15% infill
works great, grabbed a ton of rolls of printbed and absolutely needed this
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld