APPLE MAGIC MOUSE ERGONOMIC ATTACHMENT 苹果鼠标人体工学适配器 by FLOWERS GEAR

FLOWERS GEAR

Household>Office

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 12% infill

Designer

1.3 h

1 plate

4.1(34)

Cubic infill 0.2mm layer, 2 walls, 25% infill

2 h

1 plate

4.1(8)

Boost

175

289

502

353

Released

Description

Comment & Rating (76)

@lukedoky

I tried your profile and sliced my own profile. both prints came out nice, but unusable. I can only insert it about half way through, any deeper would results both buttons pushed down. At half way through, the mouse is too long and unstable. I have Magic Mouse 2, which is slightly bigger and taller than Magic Mouse 1, but I’m not sure if that’s the problem.

The designer has replied

@lukedoky

actually somehow it worked after I tried again. don’t know what happened

(Edited)

@Der3De

Same here

@FLOWERSGEAR

Please completely remove the support and align the mouse pad with the groove.

@lemon666

it's really good.

The designer has replied

@FLOWERSGEAR

NICE！

@JayZ

我用A1&PLA打印的，去除支撑后勉强能够插入（首次插入最好进行打磨，不然会损伤鼠标！！！），但是无法正常点击使用。为了正常使用，本人使用简陋工具不间断反复打磨支撑位置大约一小时！打磨期间又选择另外一个关联模型打印（竖立无需支撑版），打印完成后一次插入就可以正常使用，非常顺滑！对比后主要问题还是在支撑上，可能我没有使用专门的支撑材料，等支撑材料到货再测试一遍，感谢设计师聪慧的设计，现在鼠标体验上有种脱胎换骨之感，再次感谢。

@user_659280447

你是怎么设置的？

@JayZ

Replying to @user_659280447 :

我是新手目前都是使用模型默认设置打印。

@aristos555

Print Profile

0.2mm layer, 2 walls, 12% infill

It makes using the Apple mouse much more comfortable for my hand. The model itself has some artifacts, but like in general, it’s fine. It is definitely make usage of Apple mouse, much more comfortable for my hand. In general, it’s fine.

The designer has replied

@FLOWERSGEAR

Thanks! I eagerly anticipate that my other works will bring you the same delightful experience.

@user_2721025932

Replying to @FLOWERSGEAR :

Firstly, it should be acknowledged that the feel is very good, but the height inside needs to be adjusted to increase. Now, when the mouse is pushed halfway through the model, the mouse button will be locked. As long as the thickness above the model becomes thinner, it can be improved without changing other designs of the existing model. We hope to see the author's revised version. Thank you for your design

@3DTury

Print Profile

0.2mm layer, 2 walls, 12% infill

really ergonomic! it fits well but sometimes buttons remains pushed. i had to reduce the roof height manually

@JayZ

用A1&PLA打印，打印完成后一次插入就可以正常使用，非常顺滑！感谢设计师聪慧的设计，优雅解决充电问题。

@Pete39873

Print Profile

0.2mm layer, 2 walls, 12% infill

Other Issues:very comfortable, printed easily, removing supports was alittle challenging. my problem is when I put it on the buttons are stuck down so sadly I cannot use this. I use the Magic Mouse 2.

The designer has replied

@FLOWERSGEAR

Why not try not inserting it so deeply / placing a small piece of tissue behind the mouse.

(Edited)

@niltsh

Boosted

Finally there is someone standing out to solve this issue. Actually I have bought several attachments in Amazon, none is even useful. Great job! However, I have some thought after using several hours. As it fits into my palm so well, there is nowhere the air could go through and I got sweaty in hand when hold it. I suggest to make a voronoi pattern to make it hollow.

The designer has replied

@FLOWERSGEAR

Thank you for your support! When I first started making this model, I adopted a design based on the surface of a polygonal Voronoi diagram. However, due to the lack of a reliable 3D printer and PVA support material at hand, I had to switch to the current version. Once I recently acquire the X1CC and PVA materials, I will update this project~ 感谢你的支持！一开始我做这个模型时就采用了多边形维诺图表面的设计，但是苦于手头没有一台足够可靠的3d打印机和PVA支撑材料，所以就改成了现在的版本，等我最近购入X1CC和PVA材料后，我会更新这个项目的～

@niltsh

Boosted

Replying to @FLOWERSGEAR :

我建议不要做 3维的 voronoi，我自己做过一个键盘托，三维的太难打印了。可以做 2维的。你可以看下我的一个作品键盘托，那个是不需要 support，希望能对你有些参考作用

@ezequielgp

Great idea

The designer has replied

@FLOWERSGEAR

TKS :)