Summary

This is a stand for a Loupedeck Live that allows it to be angled upwards, and to be raised above the back of my keyboard.

It is designed to be used with my Microsoft Flight Simulator where, like most desktop pilots, I am more 'laid back' than normal artistic users of a Loupedeck.

It is large print and (for some unknown reason) causes unnecessary 'size' warnings in the FlashPrint program when prinitng to my Flashforge Dreamer. I suggest that you first check the size capabilities of your printer.

The model size is 1580.0mm wide, 1219.082mm deep, 1186.482mm tall when printed upright.

To reduce the 'largish' filament quantity required, the angled 'stand' on which the 'tray' sits is a hollow shell with a 4mm wall. Ensure that you have an adequate amount of filament loaded before you start printing to avoid running out before you reach the top.

The somewhat oddly-positioned indentations for the feet are based upon my particular Loupedeck Live and could vary between instances, since they seem to be positioned by hand.

Print Settings

Printer Brand:

FlashForge

Printer:

Dreamer

Rafts:

No

Supports:

No

Resolution:

0.4mm

Infill:

15%

Filament:

Matteforge Matte 1.75mm PLA Black looks good

Notes:

The Flashforge Dreamer (together with the Matteforge filament) had no need for supports.

Printed with 195c nozzle and 60c bed.