Cute Skull and crossbones earrings I made.

These are meant to be combined with an earring hook and jump ring, a 6mm OD jump ring is necessary, a 5mm OD will work too, 4mmOD is very difficult but doable. Either way the jump rings may be difficult to attach, I didn't want to print a loop but that made the jump ring attachment more difficult. You will need needle nose pliers.

Also to be used with a .2mm Nozzle, otherwise much of the detail is lost, but still doable with .4mm

The print pauses twice to switch colors

1st color is white, 2nd is black, 3rd is red

UPDATE 1/12/24: If printing with a .4mm nozzle change the inner and outer walls to .25 and it should print that black outline pretty well, if not then you can mess with those settings, I've gone as far as .2 on all the line widths and been fine.

These models take time and work to get right, I do this for fun and not business but if you want to support me or show gratitude and buy me a coffee I'd be Extremely grateful! https://www.buymeacoffee.com/eier

Let me know if you have any requests, Thank You!