These started as signs for my own use vendor fairs and pop ups that would show off the multicolor printing capabilities of Bambu Lab printers alongside the prints. I couldn't find anything remotely like what I had in mind so here we are. The signs measure apprx. 101 mm x 62 mm x 2 mm. The lettering is set to apprx. 1 mm. They do vary slightly particularly in thickness because I designed them in Bambu Studio.

These came out great for my needs. My hope is they'll help out other local sellers, too. Some stuff that may help:

• I'm new to 3D model development so set expectations accordingly. I have tested most of the versions but not all. Let me know if you bump into any issues, and I'll do my best to fix it and learn along the way. We all gotta start somewhere!
• The main print profile has all the signs face down for that fantastic surface quality. They look great on the Textured PEI plate. I'd love to see Cool Plate and some of those PEO finishes!
• Euro Print Profile for AMS now available with two raw print file versions for both AMS and layer height changes for non-AMS printers. I have NOT finished test printing all variations yet but wanted to get these files available per request. Please inspect your slices carefully before printing! I'm fighting Bambu Studio to get these to line up on the face. When in doubt you may want to print face up and play with your top surface settings instead.
• I included a second 3MF for easier text editing. USE WITH CAUTION! The text goes whacky as soon as you Edit Text in the By Object view. This is not a me thing…it's a slicer software limitation we're working around.
  • Bambu Studio doesn't offer an align feature, so you have to manually adjust z height and sometimes X and Y angles. It's even worse if you try to edit face down.
  • After you with that battle, if you want the cleanest surface finish you'll need to flip the sign face down and then do some fine tuning after slicing to get the faces flush. (I found adjusting the Y axis 180 degrees to be easiest.)
• For those not familiar, STL's as always are just the geometry. Each was made with separate objects for the sign and text, so if you do want to download just one or two and manually Paint in Bambu Studio it should be a snap with Fill.

NEW! I've designed a new set of price signs with built-in stands that are a bit smaller, use less filament, and require less print time. I use a mix of both in my pop-up booth! These are the new ones. >>>

Past updates to this original design:

ADDED November 26, 2023: Euro Print Profile as well as 3mf versions for AMS and non-AMS change at layer height in the raw print files. WARNING these are raw files and work in progress in response to request. Please check your slices carefully for any errors. Comments alerting me to any issues are welcome so I can fix them!

REVISED November 2, 2023: Fixed floating regions on the $12 and $25 signs thanks to a heads up they were failing from a commenter. I've replaced the main Print Profile and Face Up 3MF raw file for customization. I also replaced those two STL's with revised versions.